- Под заказ
-
-
-
-
Mean Well HDR-100Вт-12/15/24/48В. Источник питания на DIN-рейку 35мм.
Уточняйте цены по телефону! Цена в карточке товара указана на модель Mean Well HDR-100-12.
ОСНОВНЫЕ ХАРАКТЕРИСТИКИ:
Вход:| Входное напряжение | 85~264 VAC, 120~370 VDC |
| Выходное напряжение / Ток HDR-100-12 (N) HDR-100-15 (N) HDR-100-24 (N) HDR-100-48 (N) |
12 VDC / 7.1 А (7.5 А) 15 VDC / 6,13 (6,5 А) 24 VDC / 3,83 А (4,2 А) 48 VDC / 1.92 А (2,1 А) |
| Номинальная мощность HDR-100-12 (N) HDR-100-15 (N) HDR-100-24 (N) HDR-100-48 (N) |
85,2 W (90 W) 92 W (97.5 W) 92 W (100.8 W) 92,2 W (100.8 W) |
| Для установки | на DIN-рейку |
| Рабочий температурный диапазон | от -30 до +70°C |
| Размеры (Ш*В*Г), мм | 70*90*54.5 |
| Масса, г | 270 |
ВСЕ ХАРАКТЕРИСТИКИ:
| MODEL | HDR-100-12 | HDR-100-12N | HDR-100-15 | HDR-100-15N | HDR-100-24 | HDR-100-24N | HDR-100-48 | HDR-100-48N | |||
| OUTPUT |
DC VOLTAGE | 12V | 15V | 24V | 48V | ||||||
| RATED CURRENT | 7.1A | 7.5A | 6.13A | 6.5A | 3.83A | 4.2A | 1.92A | 2.1A | |||
| CURRENT RANGE | 0 ~ 7.1A | 0 ~ 7.5A | 0~ 6.13A | 0 ~ 6.5A | 0 ~ 3.83A | 0 ~4.2A | 0 ~1.92A | 0 ~2.1A | |||
| RATED POWER | 85.2W | 90W | 92W | 97.5W | 92W | 100.8W | 92.2W | 100.8W | |||
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | 120mVp-p | 150mVp-p | 240mVp-p | |||||||
| VOLTAGEADJ. | Pass LPS | 12 ~ 13V | 15~ 17V | 24 ~ 25.5V | 48 ~ 48.7V | ||||||
| RANGE | Non LPS | 12~ 13.8V | 13.5 ~ 18V | 21.6 ~ 29V | 43.2 ~ 55.2V | ||||||
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ± 1.0% | |||||||
| LINE REGULATION | ±1.0% | ±1.0% | ±1.0% | ± 1.0% | |||||||
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ± 1.0% | |||||||
| SETUP, RISE TIME | 500ms, 60ms/230VAC 500ms, 60ms/115VAC at full load | ||||||||||
| HOLD UP TIME (Typ.) | 30ms/230VAC, 12ms/115VAC at full load | ||||||||||
| INPUT |
VOLTAGE RANGE | 85 ~ 264VAC (277VAC operational), 120 ~ 370VDC (390VDCoperational) | |||||||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||||||
| EFFICIENCY (Typ.) | 88% | 89% | 90% | 90% | |||||||
| AC CURRENT (Typ.) | 3A/115VAC, 1.6A/230VAC | ||||||||||
| INRUSH CURRENT (Typ.) | COLD START 35A/115VAC, 70A/230VAC | ||||||||||
| PROTECTION |
OVERLOAD | HDR-100 :102~ 110% rated output power; HDR-100-xxN : 105 ~150% rated output power | |||||||||
| Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed | |||||||||||
| OVER VOLTAGE | Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed | ||||||||||
| 14.2 ~ 16.2V | 18.8 ~ 22.5V | 30 ~ 36V | 56.5 ~ 64.8V | ||||||||
| Protection type : Shut down o/p voltage, re-power on to recover | |||||||||||
| ENVIRONMENT |
WORKING TEMP. | -30 ~ +70/ (Refer to "Derating Curve") | |||||||||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||||||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85/, 10 ~ 95% RH non-condensing | ||||||||||
| TEMP. COEFFICIENT | ±0.03%// (0~ 50/) RH non-condensing | ||||||||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||||||||||
| OPERATINGALTITUDE | 2000 meters | ||||||||||
| OVER VOLTAGE CATEGORY | Ш ; According to EN61558, EN50178,EN60664-1, EN62477-1 ; altitude up to 2000 meters | ||||||||||
| SAFETY & EMC (Note 5) |
SAFETY STANDARDS | UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC TP TC 004, BSMI CNS14336-1 approved; Design refer to TUV EN62368-1 | |||||||||
| WITHSTAND VOLTAGE | I/P-O/P:4KVAC | ||||||||||
| ISOLATION RESISTANCE | I/P-O/P:100M Ohms / 500VDC / 25// 70% RH | ||||||||||
| EMC EMISSION |
Parameter | Standard | Test Level / Note | ||||||||
| Conducted | EN55032(CISPR32), CNS13438 | Class B | |||||||||
| Radiated | EN55032(CISPR32), CNS13438 | Class B | |||||||||
| Harmonic Current (Note 5) | EN61000-3-2 | Class A | |||||||||
| Voltage Flicker | EN61000-3-3 | ------- | |||||||||
| EMC IMMUNITY |
EN55024, EN61000-6-2, EN61204-3 | ||||||||||
| Parameter | Standard | Test Level /Note | |||||||||
| ESD | EN61000-4-2 | Level 3, 8KV air; Level 2, 4KV contact, criteria A | |||||||||
| Radiated Susceptibility | EN61000-4-3 | Level 3, criteria A | |||||||||
| EFT/Burest | EN61000-4-4 | Level 3, criteria A | |||||||||
| Surge | EN61000-4-5 | Level 4,2KV/L-N, criteria A | |||||||||
| Conducted | EN61000-4-6 | Level 3, criteria A | |||||||||
| Magnetic Field | EN61000-4-8 | Level 4, criteria A | |||||||||
| Voltage Dips and interruptions | EN61000-4-11 | >95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods | |||||||||
| OTHERS |
MTBF | 856.5K hrs min MIL-HDBK-217F (25/) | |||||||||
| DIMENSION | 70*90*54.5mm (W*H*D) | ||||||||||
| PACKING | 0.27Kg; 48pcs/14Kg/1.06CUFT | ||||||||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.V & 47/;f parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Harmonic current test at 90% load for HDR-100-xxN. 5. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft). | ||||||||||
Mean Well HDR-100W - 12/15/24/48В. Вход: 85~264 VAC, 120~370 VDC. Блок питания на DIN-рейку.
- Производитель: Mean Well
- Модель: Mean Well HDR-100-12, HDR-100-15, HDR-100-24, HDR-100-48
- Наличие: В наличии
-
120.00 BYN с НДС
