Под заказ

Описание

Mean Well HDR-150Вт-12/15/24/48В. Источник питания на DIN-рейку 35мм.

Уточняйте цены по телефону! Цена в карточке товара указана на модель Mean Well HDR-150-12.

ОСНОВНЫЕ ХАРАКТЕРИСТИКИ:

Вход:

Входное напряжение

85~264 VAC,
120~370 VDC

Выход:

Выходное напряжение / Ток HDR-150-12 HDR-150-15 HDR-150-24 HDR-150-48	12 VDC / 7.1 А 15 VDC / 6,13 24 VDC / 3,83 А 48 VDC / 1.92 А
Номинальная мощность HDR-150-12 HDR-150-15 HDR-150-24 HDR-150-48	85,2 W 92 W 92 W 92,2 W

Другие параметры:

Для установки	на DIN-рейку
Рабочий температурный диапазон	от -30 до +70°C
Размеры (ШВГ), мм	1059054.5
Масса, г	310

ВСЕ ХАРАКТЕРИСТИКИ:

MODEL			HDR-150-12	HDR-150-15		HDR-15-24		HDR-150-48
OUTPUT	DC VOLTAGE		12V	15V		24V		48V
	RATED CURRENT	115VAC	10.2A	8.55A		5.31A		2.72A
		230VAC	11.3A	9.5A		6.25A		3.2A
	RATED POWER	115VAC	122.4W	128.3W		127.4W		130.6W
		230VAC	135.6W	142.5W		150W		153.6W
	RIPPLE & NOISE (max.) Note.2		100mVp-p	120mVp-p		150mVp-p		200mVp-p
	VOLTAGEADJ. RANGE		10.8~ 13.8V	13.5 ~ 18V		21.6 ~ 29V		43.2 ~ 55.2V
	VOLTAGE TOLERANCE Note.3		±2.0%	±1.0%		± 1.0%		± 1.0%
	LINE REGULATION		±1.0%	±1.0%		± 1.0%		± 1.0%
	LOAD REGULATION		±1.0%	±1.0%		± 1.0%		± 1.0%
	SETUP, RISE TIME		500ms, 60ms/230VAC 500ms, 60ms/115VAC at full load
	HOLD UP TIME (Typ.)		30ms/230VAC 12ms/115VAC at full load
INPUT	VOLTAGE RANGE		85 ~ 264VAC (277VAC operational), 120 ~ 370VDC (390VDCoperational)
	FREQUENCY RANGE		47 ~ 63Hz
	EFFICIENCY (Typ.)		89%	89.5%		90.5%		90.5%
	AC CURRENT (Typ.)		3A/115VAC 1.6A/230VAC
	INRUSH CURRENT (Typ.)		COLD START 35A/115VAC, 70A/230VAC
PROTECTION	OVERLOAD		105 ~ 135% rated output power
			Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed
			Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed
	OVER VOLTAGE		14.2 ~ 16.2V	18.8 ~ 22.5V		30 ~ 36V		56.5 ~ 64.8V
			Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.		-30 ~ +70C (Refer to "Derating Curve")
	WORKING HUMIDITY		20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY		-40 ~ +85C, 10 ~ 95% RH non-condensing
	TEMP. COEFFICIENT		±0.03%/C (0 ~45°C) RH non-condensing
	VIBRATION		10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
	OPERATINGALTITUDE		2000 meters (Note 4)
	OVER VOLTAGE CATEGORY		III According to EN62368,EN61558, EN50178,EN60664-1, EN62477-1altitude up to 2000 meters
SAFETY & EMC (Note.7)	SAFETY STANDARDS		IEC62368-1, UL62368-1, UL61010, TUV EN61558-2-16, EAC TP TC 004 approved; Design refer to EN50178,TUV EN62368-1
	WITHSTAND VOLTAGE		I/P-O/P:4KVAC
	ISOLATION RESISTANCE		I/P-0/P:100M Ohms / 500VDC / 25C/ 70% RH
	EMC EMISSION		Parameter		Standard		Test Level / Note
			Conducted		EN55032(CISPR32)		Class B
			Radiated		EN55032(CISPR32)		Class B (note 5)
			Harmonic Current (Note 6)		EN61000-3-2		Class A
			Voltage Flicker		EN61000-3-3
	EMC IMMUNITY		EN55024, EN61000-6-2
			Parameter		Standard		Test Level /Note
			ESD		EN61000-4-2		Level 3, 8KV air; Level 2, 4KV contact, criteria A
			Radiated Susceptibility		EN61000-4-3		Level 3, criteria A
			EFT/Burest		EN61000-4-4		Level 3, criteria A
			Surge		EN61000-4-5		Level 4,2KV/L-N, criteria A
			Conducted		EN61000-4-6		Level 3, criteria A
			Magnetic Field		EN61000-4-8		Level 4, criteria A
			Voltage Dips and interruptions		EN61000-4-11		>95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS	MTBF		536K hrs min. MIL-HDBK-217F (25C)
	DIMENSION		1059054.5mm (WHD)
	PACKING		0.31Kg; 32pcs/11Kg/1.0CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25"C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a O.Vf & 47/Л parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft). 5. When the input voltage is 230VAC,delivers EMI Class В for radiated emission for the power supply; When the input voltage is 110VAC, delivers EMI ClassAfor radiated emission for the power supply. 6. Harmonic current test at 70% load . 7. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

Mean Well HDR-150W - 12/15/24/48В. Вход: 85~264 VAC, 120~370 VDC. Блок питания на DIN-рейку.

Производитель: Mean Well
Модель: Mean Well HDR-150-12, HDR-150-15, HDR-150-24, HDR-150-48
Наличие: В наличии