0

Mean Well HDR-100Вт-12/15/24/48В. Источник питания на DIN-рейку 35мм.Mean Well

Уточняйте цены по телефону! Цена в карточке товара указана на модель Mean Well HDR-100-12.

ОСНОВНЫЕ ХАРАКТЕРИСТИКИ:

Вход:
Входное напряжение 85~264 VAC,
120~370 VDC
Выход:
Выходное напряжение / Ток
HDR-100-12 (N)
HDR-100-15 (N)
HDR-100-24 (N)
HDR-100-48 (N)

12 VDC / 7.1 А (7.5 А)
15 VDC / 6,13 (6,5 А)
24 VDC / 3,83 А (4,2 А)
48 VDC / 1.92 А (2,1 А)
Номинальная мощность
HDR-100-12 (N)
HDR-100-15 (N)
HDR-100-24 (N)
HDR-100-48 (N)

85,2 W (90 W)
92 W (97.5 W)
92 W (100.8 W)
92,2 W (100.8 W)
Другие параметры:
Для установки на DIN-рейку
Рабочий температурный диапазон от -30 до +70°C
Размеры (Ш*В*Г), мм 70*90*54.5
Масса, г 270

ВСЕ ХАРАКТЕРИСТИКИ:

MODEL HDR-100-12 HDR-100-12N HDR-100-15 HDR-100-15N HDR-100-24 HDR-100-24N HDR-100-48 HDR-100-48N
 
 
 
 
 
OUTPUT
 
 
 
 
 
 
DC VOLTAGE 12V 15V 24V 48V
RATED CURRENT 7.1A 7.5A 6.13A 6.5A 3.83A 4.2A 1.92A 2.1A
CURRENT RANGE 0 ~ 7.1A 0 ~ 7.5A 0~ 6.13A 0 ~ 6.5A 0 ~ 3.83A 0 ~4.2A 0 ~1.92A 0 ~2.1A
RATED POWER 85.2W 90W 92W 97.5W 92W 100.8W 92.2W 100.8W
RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 240mVp-p
VOLTAGEADJ. Pass LPS 12 ~ 13V 15~ 17V  24 ~ 25.5V 48 ~ 48.7V
RANGE Non LPS 12~ 13.8V 13.5 ~ 18V 21.6 ~ 29V 43.2 ~ 55.2V
VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ± 1.0%
LINE REGULATION ±1.0% ±1.0% ±1.0% ± 1.0%
LOAD REGULATION ±1.0% ±1.0% ±1.0% ± 1.0%
SETUP, RISE TIME 500ms, 60ms/230VAC 500ms, 60ms/115VAC at full load
HOLD UP TIME (Typ.) 30ms/230VAC,  12ms/115VAC at full load     
 
 
INPUT
 
 
VOLTAGE RANGE 85 ~ 264VAC (277VAC operational), 120 ~ 370VDC (390VDCoperational)   
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 88% 89% 90% 90%
AC CURRENT (Typ.) 3A/115VAC, 1.6A/230VAC       
INRUSH CURRENT (Typ.) COLD START 35A/115VAC,  70A/230VAC     
 
 
PROTECTION
 
 
OVERLOAD  HDR-100 :102~ 110% rated output power; HDR-100-xxN : 105 ~150% rated output power  
Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed 
OVER VOLTAGE Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed
14.2 ~ 16.2V 18.8 ~ 22.5V 30 ~ 36V 56.5 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
 
 
 
ENVIRONMENT
 
 
 
WORKING TEMP. -30 ~ +70/ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85/, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%// (0~ 50/) RH non-condensing     
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
OPERATINGALTITUDE 2000 meters
OVER VOLTAGE CATEGORY Ш ; According to EN61558, EN50178,EN60664-1, EN62477-1 ; altitude up to 2000 meters
 
 
 
 
 
 
 
SAFETY &
EMC (Note 5)
 
 
 
 
 
 
 
SAFETY STANDARDS UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC TP TC 004, BSMI CNS14336-1 approved; Design refer to TUV EN62368-1
WITHSTAND VOLTAGE I/P-O/P:4KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25// 70% RH
  
  
EMC EMISSION
  
  
Parameter   Standard   Test Level / Note 
Conducted EN55032(CISPR32), CNS13438 Class B
Radiated EN55032(CISPR32), CNS13438 Class B
Harmonic Current (Note 5) EN61000-3-2 Class A
Voltage Flicker  EN61000-3-3  -------  
  
  
  
  
EMC IMMUNITY
  
  
  
  
EN55024, EN61000-6-2, EN61204-3
Parameter Standard Test Level /Note
ESD EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact, criteria A
Radiated Susceptibility EN61000-4-3 Level 3, criteria A
EFT/Burest EN61000-4-4 Level 3, criteria A
Surge EN61000-4-5 Level 4,2KV/L-N, criteria A
Conducted EN61000-4-6 Level 3, criteria A
Magnetic Field EN61000-4-8 Level 4, criteria A
Voltage Dips and interruptions EN61000-4-11 >95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods
 
OTHERS
 
MTBF 856.5K hrs min  MIL-HDBK-217F (25/)     
DIMENSION 70*90*54.5mm (W*H*D)
PACKING 0.27Kg; 48pcs/14Kg/1.06CUFT
NOTE 1.    All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2.    Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.V & 47/;f parallel capacitor. 3.    Tolerance : includes set up tolerance, line regulation and load regulation. 4.    Harmonic current test at 90% load for HDR-100-xxN. 5.    The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6.    The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).

Mean Well HDR-100W - 12/15/24/48В. Вход: 85~264 VAC, 120~370 VDC. Блок питания на DIN-рейку.

  • Производитель: Mean Well
  • Модель: Mean Well HDR-100-12, HDR-100-15, HDR-100-24, HDR-100-48
  • Наличие: Есть в наличии
  • 120.00 BYN