0

Mean Well HDR-150Вт-12/15/24/48В. Источник питания на DIN-рейку 35мм.Mean Well

Уточняйте цены по телефону! Цена в карточке товара указана на модель Mean Well HDR-150-12.

ОСНОВНЫЕ ХАРАКТЕРИСТИКИ:

Вход:
Входное напряжение 85~264 VAC,
120~370 VDC
Выход:
Выходное напряжение / Ток
HDR-150-12
HDR-150-15
HDR-150-24
HDR-150-48

12 VDC / 7.1 А
15 VDC / 6,13
24 VDC / 3,83 А
48 VDC / 1.92 А
Номинальная мощность
HDR-150-12
HDR-150-15
HDR-150-24
HDR-150-48

85,2 W
92 W
92 W
92,2 W
Другие параметры:
Для установки на DIN-рейку
Рабочий температурный диапазон от -30 до +70°C
Размеры (Ш*В*Г), мм 105*90*54.5
Масса, г 310

ВСЕ ХАРАКТЕРИСТИКИ:

MODEL HDR-150-12 HDR-150-15 HDR-15-24 HDR-150-48
 
 
 
 
 
 
OUTPUT
 
 
 
 

 
DC VOLTAGE 12V 15V 24V 48V
RATED CURRENT 115VAC 10.2A 8.55A 5.31A 2.72A
230VAC 11.3A 9.5A 6.25A 3.2A
RATED POWER 115VAC 122.4W 128.3W 127.4W 130.6W
230VAC 135.6W 142.5W 150W 153.6W
RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 150mVp-p 200mVp-p
VOLTAGEADJ. RANGE 10.8~ 13.8V 13.5 ~ 18V 21.6 ~ 29V 43.2 ~ 55.2V
VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ± 1.0% ± 1.0%
LINE REGULATION ±1.0% ±1.0% ± 1.0% ± 1.0%
LOAD REGULATION ±1.0% ±1.0% ± 1.0% ± 1.0%
SETUP, RISE TIME 500ms, 60ms/230VAC 500ms, 60ms/115VAC at full load
HOLD UP TIME (Typ.) 30ms/230VAC 12ms/115VAC at full load
 
 
INPUT
 

 
VOLTAGE RANGE 85 ~ 264VAC (277VAC operational), 120 ~ 370VDC (390VDCoperational)  
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 89% 89.5% 90.5% 90.5%
AC CURRENT (Typ.) 3A/115VAC 1.6A/230VAC
INRUSH CURRENT (Typ.) COLD START 35A/115VAC, 70A/230VAC   
 
 
PROTECTION
 

 
  
OVERLOAD 
  
105 ~ 135% rated output power
Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed
Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed
OVER VOLTAGE 14.2 ~ 16.2V 18.8 ~ 22.5V 30 ~ 36V 56.5 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
 
 
 
ENVIRONMENT
 
 

 
WORKING TEMP. -30 ~ +70C (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85C, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%/C (0 ~45°C) RH non-condensing
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
OPERATINGALTITUDE 2000 meters (Note 4)
OVER VOLTAGE CATEGORY III According to EN62368,EN61558, EN50178,EN60664-1, EN62477-1altitude up to 2000 meters
 
 
 
 
 
 
 
SAFETY &
EMC
(Note.7)
 
 
 
 
 
 

 
SAFETY STANDARDS IEC62368-1, UL62368-1, UL61010, TUV EN61558-2-16, EAC TP TC 004 approved; Design refer to EN50178,TUV EN62368-1
WITHSTAND VOLTAGE I/P-O/P:4KVAC
ISOLATION RESISTANCE I/P-0/P:100M Ohms / 500VDC / 25C/ 70% RH
  
  
EMC EMISSION 
  
  
Parameter Standard Test Level / Note
Conducted EN55032(CISPR32) Class B
Radiated EN55032(CISPR32) Class B (note 5)
Harmonic Current (Note 6)  EN61000-3-2  Class A 
Voltage Flicker EN61000-3-3
  
  
  
  
EMC IMMUNITY 
 
  
  
  
EN55024, EN61000-6-2
Parameter Standard Test Level /Note
ESD EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact, criteria A
Radiated Susceptibility EN61000-4-3 Level 3, criteria A
EFT/Burest EN61000-4-4 Level 3, criteria A
Surge EN61000-4-5 Level 4,2KV/L-N, criteria A
Conducted EN61000-4-6 Level 3, criteria A
Magnetic Field EN61000-4-8 Level 4, criteria A
Voltage Dips and interruptions EN61000-4-11 >95% dip 0. 5 periods, 30% dip 25 periods, >95% interruptions 250 periods
 
OTHERS

 
MTBF 536K hrs min. MIL-HDBK-217F (25C)
DIMENSION 105*90*54.5mm (W*H*D)
PACKING 0.31Kg; 32pcs/11Kg/1.0CUFT
NOTE 1.    All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25"C of ambient temperature. 2.    Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a O.Vf & 47/Л parallel capacitor. 3.    Tolerance : includes set up tolerance, line regulation and load regulation. 4.    The ambient temperature derating of 3.5C/1000m with fanless models and of 5C/1000m with fan models for operating altitude higher than 2000m(6500ft). 5.    When the input voltage is 230VAC,delivers EMI Class В for radiated emission for the power supply; When the input voltage is 110VAC, delivers EMI ClassAfor radiated emission for the power supply. 6.    Harmonic current test at 70% load . 7.    The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

Mean Well HDR-150W - 12/15/24/48В. Вход: 85~264 VAC, 120~370 VDC. Блок питания на DIN-рейку.

  • Производитель: Mean Well
  • Модель: Mean Well HDR-150-12, HDR-150-15, HDR-150-24, HDR-150-48
  • Наличие: Есть в наличии
  • 150.00 BYN